AccessSlice guide

AccessSlice lets you prepare, slice and send 3D prints with a screen reader, from start to finish. Every setting is a labelled field, every result is spoken, and the printer can be followed and controlled from ordinary pages instead of a touchscreen.

It is free, open source, and made by one person.

What AccessSlice does

Mainstream slicers such as Bambu Studio, PrusaSlicer and Creality Print draw their own screens, and screen readers cannot use most of them. AccessSlice does not replace the slicer. It replaces the screens:

• A slicer project (a 3MF file) is a zip of plain text, so every setting in it - layer height, walls, infill, supports, filaments, where each object sits on the plate - can be read and changed as text. AccessSlice shows all of that as simple pages with real headings, labelled fields and buttons.
• It slices with your slicer’s own slicing engine, so the result is exactly what the slicer itself would produce.
• It tells you the result in words: print time, filament used, and any warnings. A layer-by-layer preview describes every layer.
• It sends the print to the printer. Prusa and Creality printers get it straight over your home network; Bambu Lab printers get it through Bambu Studio’s own send window, with AccessSlice telling you exactly which keys to press. A USB drive works for every printer.
• On Prusa and Creality printers it also reads the print’s progress aloud and controls the printer: preheat, load and unload filament, move and home, pause and stop, and the files on the printer.

Nothing is hidden behind a picture. The 3D view of the plate and the sliced preview are there for sighted helpers, and every fact in them is also on the page in words.

Which printers work

Tested from start to finish

These printers have been used with AccessSlice for real prints, from a new job to the finished part:

• Bambu Lab X1 Carbon, with Bambu Studio
• Bambu Lab H2C, with Bambu Studio
• Prusa Core One, with PrusaSlicer
• Creality K2 Plus, with Creality Print

Expected to work, not tested yet

These use the same slicer and talk to the printer the same way as a tested printer, so they should work. Nobody has tried them yet. If you do, please report how it went (see “Reporting a problem or a new printer” below).

• Other Bambu Lab printers that Bambu Studio can send to (P1S, P1P, A1, A1 mini, X1E, H2D and others). Sending goes through Bambu Studio, so anything Bambu Studio can print to should work.
• Other Prusa printers with PrusaLink: Core One L, MK4 and MK4S, MK3.9 and MK3.5, XL, and the MINI with Prusa’s network module or a cable. An MK3S with PrusaLink on a Raspberry Pi probably works too.
• Other Creality printers on Creality OS: K2 and K2 Pro, K1, K1C, K1 Max and K1 SE, Ender-3 V3, V3 KE and V3 Plus, and the Creality Hi.
• Anycubic printers with Anycubic Slicer Next, and other printers with OrcaSlicer: editing and slicing work in AccessSlice; the send happens in the slicer’s own window.

Not supported

• Creality printers without Creality OS (for example the Ender-3 V3 SE on its own, the CR-10 Smart, the Sermoon series), the SPARKX i7, resin printers, and rooted Creality printers whose Creality services were removed.
• Klipper printers reached through Moonraker (Voron, Sovol, Qidi, Elegoo and others) cannot be sent to or controlled yet. Their projects can still be edited and sliced if your slicer is one of the five above.

The details and sources are in the printer compatibility notes on GitHub.

What you need

• Windows 10 or 11, 64-bit.
• Your printer’s slicer, installed in its standard place: Bambu Studio, PrusaSlicer, Creality Print (version 7 is tested), OrcaSlicer or Anycubic Slicer Next. AccessSlice uses its slicing engine and its printer and filament profiles. The setup wizard tells you where to download it.
• A screen reader if you use one. AccessSlice is tested with NVDA. Its window reads like a web page in Microsoft Edge, so JAWS and Narrator work the same way.
• For Prusa and Creality printers: the printer and this computer on the same home network.

AccessSlice never needs the internet.

Installing AccessSlice

1. Download the installer, AccessSlice-Setup-<version>.exe, from the AccessSlice page here on accessible3d.io, or from the Releases page on GitHub. Both are the same file.
2. Run the downloaded file. The installer is a standard Windows installer and reads well with a screen reader. Press Next through its pages; the defaults are right for almost everyone.
3. Start AccessSlice from the Start menu or the desktop shortcut. It opens in its own window.

Good to know:

• “Windows protected your PC”. The installer is not yet code-signed (a signing certificate costs money every year), so Windows SmartScreen may show this warning the first time. Choose More info, then Run anyway. The whole source code is public on GitHub to read.
• Antivirus. Some antivirus programs occasionally flag programs packaged the way AccessSlice is packaged (with PyInstaller). If yours does, restore the file and add an exception.
• No administrator rights needed. AccessSlice installs under your own user profile.
• The window uses Microsoft’s WebView2, which is part of Windows 11. On Windows 10 the installer offers Microsoft’s free download if it is missing.
• Uninstalling: Windows Settings, Apps, AccessSlice, Uninstall. Your AccessSlice settings in your AppData folder are kept, so a reinstall picks up where you left off.

The first start: the setup wizard

The first time AccessSlice starts, a setup wizard takes you through everything it needs, one step per page. Each page says exactly what to do and ends with a button for the next step. It takes about ten minutes, most of it in the slicer’s own installer.

1. Choose your printer. The four tested printers come first; the others are listed as not tested yet.
2. Install the slicer and set up your printer in it. The page names the maker’s download site and what to do on the slicer’s first start. It also says plainly what AccessSlice will and will not do with your printer.
3. Prusa only: put the printer on the network and turn on PrusaLink, on the printer’s own screen.
4. Where AccessSlice keeps your projects. A folder in your Documents is suggested. AccessSlice finds the slicer program by itself and fills in its path.
5. Prusa and Creality: how AccessSlice reaches the printer. The printer’s address (and, for Prusa, its PrusaLink password) is filled in from the slicer’s own records when the slicer already knows the printer. Test the connection and save asks the printer before anything is saved. You can skip this step and do it at the first send instead.
6. Save your first project from the slicer. AccessSlice builds every new job on a project saved for that printer, because that is where the printer’s settings and your filaments come from. A button opens the slicer for you, and Check the projects folder lists what AccessSlice found, with the printer each project was made for.
7. Check and finish. A summary of what is set up and what is still missing, then a short guided tour of AccessSlice, which you can skip.

The wizard can be run again at any time - for a second printer, for example - from Help and tour or from Settings.

Some slicers’ own first-start screens (signing in to Bambu Studio, for example) are hard to use with a screen reader. If you get stuck there, this is the one time a sighted helper is worth asking for. It is needed once; AccessSlice does the rest from then on.

What each printer brand needs

Bambu Lab (Bambu Studio)

• Bambu Studio installed, signed in to your Bambu Lab account, and able to send to your printer: the printer is listed on Bambu Studio’s Device page. If you already print from Bambu Studio, this is done. A printer in LAN-only mode works too, added in Bambu Studio with its access code.
• One project saved from Bambu Studio for that printer, in the AccessSlice projects folder.
• For each print, AccessSlice slices the job and opens it in Bambu Studio, and tells you the keys: Ctrl+R to re-slice (quick, same result) and Ctrl+Shift+G to send. Before that, AccessSlice moves Bambu Studio’s Device page to the project’s printer, so the send window offers the right one.
• AccessSlice does not read a Bambu printer’s status or control it. That stays in Bambu Studio and the Bambu Handy app.

Prusa (PrusaSlicer and PrusaLink)

• PrusaSlicer installed, with your printer added in its Configuration Wizard.
• The printer on your network: on the printer’s screen, Settings, Network - Wi-Fi or a cable.
• PrusaLink turned on: Settings, Network, PrusaLink on the printer’s screen. That screen shows the printer’s address and its password (PrusaSlicer calls it the API key). AccessSlice needs both. If you added the printer to PrusaSlicer as a physical printer, AccessSlice reads them from there.
• A USB drive in the printer. Prusa printers keep print files on it, so that is where AccessSlice puts every print.
• One project saved from PrusaSlicer for that printer (Ctrl+Alt+S is Save project as), in the AccessSlice projects folder.
• AccessSlice then sends, follows and controls the printer itself. The password is stored protected by Windows (DPAPI), readable only by your Windows account on this computer.
• The printer’s network name is remembered once an address has worked, so a new address from your router changes nothing.

Creality (Creality Print)

• Creality Print installed (version 7 is tested), with your printer model chosen.
• The printer on the same network as this computer (on the printer’s screen: Settings, Network) and added on Creality Print’s Device page - Creality Print searches your network for it. AccessSlice reads the printer’s address from Creality Print’s own device list, so you never type it. You can also type it in the wizard.
• The printer stays on Creality’s normal firmware. Nothing has to be rooted, and no password is needed.
• One project saved from Creality Print for that printer (Ctrl+Shift+S is Save project as), in the AccessSlice projects folder.
• Creating each new project happens in Creality Print, because its engine cannot turn a model file into a project by itself: Start a new print job opens Creality Print, you import the model and save, and AccessSlice opens the project. Only that step: slicing and sending to the printer always happen in AccessSlice.
• AccessSlice then sends, follows and controls the printer itself, including loading and unloading filament through the CFS.

Anycubic and OrcaSlicer

• The slicer installed, with your printer chosen in it, and one project saved from it into the AccessSlice projects folder.
• Editing and slicing happen in AccessSlice; for the send, AccessSlice opens the sliced job in the slicer and tells you the keys.

A print job, step by step

1. Start a new print job on the Home page. Choose the printer and give the path of your model file (an STL, STEP or OBJ). AccessSlice builds the project itself, on the settings of your newest saved project for that printer, and opens it. A large model can take a while; the building page tells you the stage and the time every 15 seconds.

   Creality printers differ in this one step only: Creality Print’s engine cannot turn a model file into a project, so AccessSlice opens Creality Print for you. Import the model with Ctrl+I, save the project with Ctrl+Shift+S, and AccessSlice opens it the moment it is saved. Everything after that - settings, slicing and sending to the printer - happens in AccessSlice, exactly as for the other brands.

   Or Open a project file you saved earlier. Your projects folder is listed newest first.

2. Edit on the tabs: Quality, Strength, Support, Speed, Adhesion, Others, Filaments, Printer and presets, Placement, All settings and Backups. Each tab shows the settings that matter most in plain language, then every other setting on that topic. Changes are staged first; the Review page lists them with old and new values, and Save writes them all, with a backup of the file you started from.

3. Slice now, on the Slice and send page. Warnings come first, in words. The slice report gives the print time, the filament used, and anything the engine complained about. Preview describes the print layer by layer.

4. Send: straight to a Prusa or Creality printer over your network, to a USB drive with one button, or through the slicer’s own send window for Bambu Lab printers. Before a print starts, AccessSlice asks you to check with your hands that the build plate is empty.

5. Print. For Prusa and Creality printers, the Printer status page reads the progress aloud every half minute and announces the end.

Moving around with a screen reader

• Landmarks. Every page has a banner with the top navigation (Home, Open a project, Settings, Help and tour, Diagnostics) and a main region. Editor pages add a navigation named “Project sections” for the tabs.
• Headings. One heading level 1 per page; sections are level 2, setting groups level 3. The heading key is the fastest way through a long tab.
• Results. After every button, the result is spoken and shown in a status line near the top. Focus stays on the control you pressed, so you never land back at the top of the page.
• Fields. Every field has a label, a unit where one applies, and a help text. Values stay exactly as the slicer stores them.
• Questions. Where the slicer would show a dialog (a 100% infill choice, millimetres or percent), AccessSlice asks the same question as a page with Yes and No.
• Zoom and themes. Pages reflow up to 400% zoom without sideways scrolling, and follow Windows’ light or dark setting.

Help and tour in the top navigation explains every page and tab, and can be read at any time.

Privacy and safety

• Nothing leaves your computer unless you press a button that says so. AccessSlice talks only to itself (on 127.0.0.1) and, when you send or follow a print, to your own printer on your own network. It never uses the internet and contains no tracking or statistics.
• The only exception is Buy me a coffee: pressing it opens the donation page in your normal web browser. Nothing is sent about you.
• AccessSlice refuses requests that do not come from its own window, so a website open in your browser cannot reach it.
• Your files are safe. Every save keeps a backup (the last ten are on the Backups tab, restorable with one button) and checks the new file before saying it was saved. If a check fails, the original is put back untouched.
• Printer safety. Moves are checked before they are sent: nothing below the plate, no sideways move with the nozzle low, a lift before homing. A print only starts after you confirm the plate is empty.

When something goes wrong

• Diagnostics, in the top navigation, lists what AccessSlice did, in order, with the full details of any unexpected error. Your files are never changed by an error.
• “The slicer program was not found”: open Settings and leave the slicer path field empty; AccessSlice looks in the standard install folders. Or paste the path to the slicer’s program; a desktop shortcut works too.
• “The printer did not answer”: check that the printer is on and on the same network, and that the address is right (the printer’s network settings screen shows it). For Prusa, check that PrusaLink is on and that the password matches.
• Bambu Studio’s send window shows the wrong printer: pick yours at the top of the send window. AccessSlice moves Bambu Studio to the project’s printer when Studio is closed; when it was already open, AccessSlice asks you first.
• A new job from a very large model is slow: that is the slicer’s engine importing millions of triangles. The building page keeps telling you the time; Cancel building stops it and keeps nothing.

Supporting AccessSlice

AccessSlice is free and made by one person. A week after you first start it, a small pop-up asks whether you would like to buy me a coffee, and after that it asks about once a month. Buy me a coffee opens buymeacoffee.com/accessible3d in your browser; Not now (or Escape) closes it until next month. There is also a quiet link on the Home page for any time.

Reporting a problem or a new printer

Please use the Issues page of AccessSlice on GitHub.

Helpful things to include:

• What you pressed, what you heard, and what you expected.
• The end of the Diagnostics page (select it and copy it).
• Your printer model, your slicer and its version, and your screen reader.

Tried a printer from the “not tested yet” list? Please report it either way - it working is as useful to hear as it failing. Printers move to the tested list as they are confirmed.

For developers

AccessSlice is Python 3 using only the standard library, with server-rendered HTML pages. Running it from source, the tests, building the installer, the project layout and how to contribute are in the README on GitHub.

Licence

AccessSlice is free software under the GNU General Public License, version 3. You may use it, study it, change it and share it; if you distribute a changed version, it must stay under the same licence with its source available. Copyright 2026 Edis Adilovic. Other licensing terms, for example for a closed product, are available from the copyright holder. Bundled third-party components and their licences are listed in THIRD_PARTY_NOTICES.md on GitHub.